Browse Videos
Abrasive Blasting – SS1024HE (12 min.)
Description
Sandblasting and other abrasive blasting is a potentially life-threatening operation without proper training. This video covers all of the important topics including PPE, equipment set & inspection, safe operating procedures, job site conditions, bystander safety and more!
Abrasive Blasting – SS1024HS (12 min.) SPANISH
Description
Sandblasting and other abrasive blasting is a potentially life-threatening operation without proper training. This video covers all of the important topics including PPE, equipment set & inspection, safe operating procedures, job site conditions, bystander safety and more!
Aerial Lift Safety - SS1031GE (13 mins)
Description
Any job that requires personnel to be elevated above the ground will also require one of the various types of aerial lifts to get them there. This video covers Hazard Recognition, Pre-Start Inspections, Work Zone Inspections, Operator Training and more...
Aerial Lift Safety - SS1031GS (13 mins) Spanish
Description
Any job that requires personnel to be elevated above the ground will also require one of the various types of aerial lifts to get them there. This video covers Hazard Recognition, Pre-Start Inspections, Work Zone Inspections, Operator Training and more...
Aerial Lift Work Platform – SS1025GE (15 min.)
Description
Aerial work platforms provide access to work areas that were one difficult or impossible to reach. But, there are potential hazards involved. That’s why anyone operating an aerial work platform must be trained and authorized before using the equipment. This program covers a broad range of topics including: Pre-Shift Inspections Operating Controls Safe Operating Procedures Driving and Steering Speed Control Fall Protection and others.
Aerial Lift Work Platform – SS1025GS Spanish
Description
Aerial work platforms provide access to work areas that were one difficult or impossible to reach. But, there are potential hazards involved. That’s why anyone operating an aerial work platform must be trained and authorized before using the equipment. This program covers a broad range of topics including: Pre-Shift Inspections Operating Controls Safe Operating Procedures Driving and Steering Speed Control Fall Protection and others.
Bucket Truck Safety - SS1021GE (12 Min.)
Description
Bucket & Boom trucks are great tools and have many uses. They allow us to reach places we could not normally reach but there are dangers you may face. That’s what this program is all about, the hazards associated with Bucket Trucks and steps you can take to help minimize your risk and keep you, and those working around you, safe.
Bucket Truck Safety - SS1021GS Spanish (12 Min.)
Description
Bucket & Boom trucks are great tools and have many uses. They allow us to reach places we could not normally reach but there are dangers you may face. That’s what this program is all about, the hazards associated with Bucket Trucks and steps you can take to help minimize your risk and keep you, and those working around you, safe.
Caught Between Hazards in Construction M276E (14 Min.)
Description
Caught-in/between accidents occur when a person is squeezed, caught, crushed, pinched or compressed between two or more objects. They are one of the four top causes of fatalities in construction work, and can result in serious injuries as well. Topics covered in these products include: What are caught-in/between hazards? The three major types of caught-in/between hazards. Trenching, scaffolding and demolition. Vehicles and heavy equipment. Powered tools and machinery. and more.
Caught in/Between Hazards - M276E (15 mins)
Description
MARCOM's Video On Demand (VOD) program on Caught-In/Between Hazards in Construction Environments provides the information employees need to recognize the caught-in/between hazards that are associated with construction tasks and avoid them before accidents happen. Caught-in/between accidents occur when a person is squeezed, caught, crushed, pinched or compressed between two or more objects. They are one of the four top causes of fatalities in construction work, and can result in serious injuries as well. Topics covered in this program include the three major types of caught-in/between hazards; vehicles and heavy equipment; powered tools and machinery; and more. This VOD program is one of the most effective and efficient ways to get employees the training that they need, in a classroom or individually through their desktop or tablet computer. The program can be delivered through your distributor or loaded onto your own delivery system.
Caught in/Between Hazards - M276S (14 mins) Spanish
Description
MARCOM’s Video On Demand (VOD) program on Caught-In/Between Hazards in Construction Environments provides the information employees need to recognize the caught-in/between hazards that are associated with construction tasks and avoid them before accidents happen. Caught-in/between accidents occur when a person is squeezed, caught, crushed, pinched or compressed between two or more objects. They are one of the four top causes of fatalities in construction work, and can result in serious injuries as well. Topics covered in this program include the three major types of caught-in/between hazards; vehicles and heavy equipment; powered tools and machinery; and more. This VOD program is one of the most effective and efficient ways to get employees the training that they need, in a classroom or individually through their desktop or tablet computer. The program can be delivered through your distributor or loaded onto your own delivery system.
Compressed Gas Cylinders: Safety Basics - SSC0031AE (10 Min.)
Description
Stored compressed gases are essential components in all areas of American industry. Compressed gas cylinders hold fuel, breathable air and chemicals that can produce devastating results if they are accidentally released or leak. This program shows the viewer the types of hazards associated with the gases, how the gases are compressed and stored and how the cylinders should be handled. The viewer will also learn how to connect gas cylinders to service lines and fixtures and how to control gas leaks.
Compressed Gas Cylinders: Safety Basics - SSC0031AS (10 Min.) Spanish
Description
Stored compressed gases are essential components in all areas of American industry. Compressed gas cylinders hold fuel, breathable air and chemicals that can produce devastating results if they are accidentally released or leak. This program shows the viewer the types of hazards associated with the gases, how the gases are compressed and stored and how the cylinders should be handled. The viewer will also learn how to connect gas cylinders to service lines and fixtures and how to control gas leaks.
Confined Space Entry SS1055HE (10 Min.)
Description
Confined Space Entry is a potentially hazardous situation, perhaps even fatal. But it doesn't have to be. If procedures are followed, Confine Space Entry can be done safely and without incident. This video: Defines Confined Space Hazards How to Control Hazards Confined Space Permits Air Testing Emergency Procedures
Confined Space Entry SS1055HS (10 Min.) Spanish
Description
Confined Space Entry is a potentially hazardous situation, perhaps even fatal. But it doesn't have to be. If procedures are followed, Confine Space Entry can be done safely and without incident. This video: Defines Confined Space Hazards How to Control Hazards Confined Space Permits Air Testing Emergency Procedures
Construction Safety Orientation The Basics SSC0020E (28 Min.)
Description
Construction Safety...that's a very broad subject. This video covers a variety of topics and is designed as a basic overview of issues and hazards present on most construction sites. It is a great Orientation video for new employees or a refresher for experienced ones.
COVID-19: Construction Awareness Training SS2206AE (11 Min.)
Description
The Coronavirus or, Covid 19 is a serious health concern world over. This short video helps dispel some myths surrounding the coronavirus and gives viewers information and common sense tips to help them remain safe. Topics include: What are the Signs and Symptoms? What Should you Do if you Think you Have Been Exposed to or Infected? How is it Diagnosed? This program also addresses some of the unique challenges present in Construction related to prevention of COVID-19.
COVID-19: Construction Awareness Training SS2206AS (11 Min.) Spanish
Description
The Coronavirus or, Covid 19 is a serious health concern world over. This short video helps dispel some myths surrounding the coronavirus and gives viewers information and common sense tips to help them remain safe. Topics include: What are the Signs and Symptoms? What Should you Do if you Think you Have Been Exposed to or Infected? How is it Diagnosed? This program also addresses some of the unique challenges present in Construction related to prevention of COVID-19.
Crane Safety in Construction - M124S (17 mins.) Spanish
Description
While there are many different types of cranes, they all have the ability to make many jobs much easier by lifting enormous weight. But they also share the potential for disaster when they are not operated safely. Crane-related accidents can often be deadly, due to the cumbersome and heavy loads that are lifted. Once a load falls, not much can be done to stop it, and there is little time for people to move safely out of the way.
Crane Safety in Construction Environments - M124E
Description
Topics covered in these products include: Recent changes in the OSHA crane regulations. Operator certification. Equipment inspection and hazard assessment. Boom, jib and overhead cranes. General and operational safety devices. Crane operations and hand signals. Working around power lines. and more.
Crane Safety: Construction Environment SSC0022E (15 Min.)
Description
Cranes are powerful, versatile equipment in use at most construction sites sometime during the construction process. One mistake can lead to serious property damage, injuries of self or employees, or even death. This program covers necessary safety protocols for the safe operation of cranes, as well as safety measures to be taken by those who work around this type of machinery on the ground. It's a must see for new workers and seasoned crane operators alike.
Crane Safety: Construction Environment SSC0022S (15 Min.) Spanish
Description
Cranes are powerful, versatile equipment in use at most construction sites sometime during the construction process. One mistake can lead to serious property damage, injuries of self or employees, or even death. This program covers necessary safety protocols for the safe operation of cranes, as well as safety measures to be taken by those who work around this type of machinery on the ground. It's a must see for new workers and seasoned crane operators alike.
Crane Signal Person: Safety Basics SSC0032AE (10 Min.)
Description
This video discusses the basics of Crane Signal Person Safety; Proper Hand Signals, Communication and some things the signal person can do to help increase safety on the job site. Video outlines each crane signal and helps everyone be on the same page.
Crane Signal Person: Safety Basics SSC0032AS (10 Min.) Spanish
Description
This video discusses the basics of Crane Signal Person Safety; Proper Hand Signals, Communication and some things the signal person can do to help increase safety on the job site. Video outlines each crane signal and helps everyone be on the same page.
Crystalline Silica Safety - SS1090IE (10 Min.)
Description
Crystalline Silica can be found throughout many industries. Respirable crystalline silica are the small particles created when cutting, sawing, grinding, drilling, and crushing stone, rock, concrete, brick, block, and mortar. This program covers basic safe work practices that employees should know and follow to help prevent harmful exposure to crystalline silica.
Crystalline Silica Safety - SS1090IS (10 Min.) Spanish
Description
Crystalline Silica can be found throughout many industries. Respirable crystalline silica are the small particles created when cutting, sawing, grinding, drilling, and crushing stone, rock, concrete, brick, block, and mortar. This program covers basic safe work practices that employees should know and follow to help prevent harmful exposure to crystalline silica.
Dump Truck Safety - SSC020PE (8 mins)
Description
This videos covers some of the hazards you might face while operating a dump truck.
Dump Truck Safety - SSC020PS (8 mins) Spanish
Description
This videos covers some of the hazards you might face while operating a dump truck.
Fall Protection SSC0023AE (10 Min.)
Description
Even a short fall can cause serious injury or even death. This great training tool covers body harnesses, shock absorbing lanyards, swing effect, rope grabs, retractable lanyards, and more. Workers who work in any environment above 4 feet or 6 feet in construction need fall protection training and need to wear fall protection equipment in these circumstances. Physical Barriers as well as personal fall arrest systems are discussed.
Fall Protection SSC0023AS (10 Min.) Spanish
Description
Even a short fall can cause serious injury or even death. This great training tool covers body harnesses, shock absorbing lanyards, swing effect, rope grabs, retractable lanyards, and more. Workers who work in any environment above 4 feet or 6 feet in construction need fall protection training and need to wear fall protection equipment in these circumstances. Physical Barriers as well as personal fall arrest systems are discussed.
Fall Protection: Equipment and Safe Practices SS1118IE (11 Min.)
Description
Falls in the workplace are one of the most common types of injuries on the job, and the goal of this program is to provide employers and employees with information on recognizing potential fall hazards at their work sites, and suggest ways to avoid, minimize, control or prevent them. The audience will learn how to identify factors that contribute to common fall hazards, and how to analyze their own work areas for those hazards. The video covers: The OSHA Fall Protection Standard Fall Protection Plans Housekeeping and Engineering Controls Personal Protective Equipment and more....
Filling Propane Tanks Safely SS1040GE (6 Min.)
Description
Propane has a variety of uses, including fueling forklifts. It is highly flammable in gas and liquid forms but it can be used safely by following a few simple safety procedures. This video shows you how.
Filling Propane Tanks Safely SS1040GS (6 Min.) Spanish
Description
Propane has a variety of uses, including fueling forklifts. It is highly flammable in gas and liquid forms but it can be used safely by following a few simple safety procedures. This video shows you how.
GFCI: The Facts SS1133AE (6 Min.)
Description
Working safely with Ground Fault Circuit Interrupters (GFCIs) is crucial to prevent electrical shocks and fires. GFCIs are electrical devices designed to protect you from electrical hazards by shutting off power to a circuit if it detects a ground fault, which can occur when electricity leaks to the ground instead of following its intended path.
GFCI: The Facts SS1133AS (6 Min.) Spanish
Description
Working safely with Ground Fault Circuit Interrupters (GFCIs) is crucial to prevent electrical shocks and fires. GFCIs are electrical devices designed to protect you from electrical hazards by shutting off power to a circuit if it detects a ground fault, which can occur when electricity leaks to the ground instead of following its intended path.
GHS: Hazardous Materials Labels SS2001FE (8 Min.)
Description
This GHS Container Labeling Training Video will help your employees understand the six types of information contained on a Globally Harmonized System (GHS) label as well as how to understand the 9 types of pictograms used in a GHS labeling program. This training DVD was created specifically to help you with the OSHA GHS compliance standard
GHS: Hazardous Materials Labels SS2001FS (8 Min.) Spanish
Description
This GHS Container Labeling Training Video will help your employees understand the six types of information contained on a Globally Harmonized System (GHS) label as well as how to understand the 9 types of pictograms used in a GHS labeling program. This training DVD was created specifically to help you with the OSHA GHS compliance standard.
GHS: Safety Data Sheets-The Basics SS2002FE (5 Min.)
Description
Explains the new GHS format for Safety Data Sheets (SDS's) adopted by OSHA when they revised their hazard communication standard. Available in English & Spanish
GHS: Safety Data Sheets-The Basics SS2002FS (5 Min.) Spanish
Description
Explains the new GHS format for Safety Data Sheets (SDS's) adopted by OSHA when they revised their hazard communication standard. Available in English & Spanish
Grinding and Abrasive Wheels SS1097IE (10 Min.)
Description
Grinding and Abrasive Wheels program provides the viewer with information on the proper use and operation of grinders in a safe manner. There are a variety of jobs in foundry operations in industries requiring the use of grinders. They can be portable grinders or fixed bench grinders. It's a safe job if you follow the rules. If you ignore safety or ignore proper grinding procedures, it can be an extremely hazardous job. We don't intend to cover all the safety rules associated with grinding. We just want to provide some information to make you more aware of safety when operating grinders.
Grinding and Abrasive Wheels SS1097IS (10 Min.) Spanish
Description
Grinding and Abrasive Wheels program provides the viewer with information on the proper use and operation of grinders in a safe manner. There are a variety of jobs in foundry operations in industries requiring the use of grinders. They can be portable grinders or fixed bench grinders. It's a safe job if you follow the rules. If you ignore safety or ignore proper grinding procedures, it can be an extremely hazardous job. We don't intend to cover all the safety rules associated with grinding. We just want to provide some information to make you more aware of safety when operating grinders.
Hand & Power Tool Safety SS1094IE (10 Min.)
Description
Everyone uses Hand & Power tools. But, because they are common, people often forget about the hazards involved. Tool accidents result in thousands of serious injuries and hundreds of deaths each year… most of which could have been avoided by simply handling tools safely. To avoid these types of accidents employees need to know how to handle their tools safely. This program is a great place to start.
Hand & Power Tool Safety SS1094IS (10 Min.) Spanish
Description
Everyone uses Hand & Power tools. But, because they are common, people often forget about the hazards involved. Tool accidents result in thousands of serious injuries and hundreds of deaths each year… most of which could have been avoided by simply handling tools safely. To avoid these types of accidents employees need to know how to handle their tools safely. This program is a great place to start.
Hazard Communication in Construction Environments - M221AS (20 mins) Spanish
Description
Hazard Communication in Construction Environments both introduces employees to the Hazard Communication regulations and provides training on the various groups of chemicals found in the construction environment. Created specifically to assist construction workers of all types in complying with federal, state and municipal Hazard Communication regulations, the course addresses the major education and training requirements in these chemical hazard laws. Areas covered in the course include background of the regulation, GHS Safety Data Sheets and container labels, toxins, corrosives and irritants; flammables, combustibles and gases; carcinogens and radiation, exposure situations, personal protective equipment and chemical storage, spills and clean-up and more. This VOD program is one of the most effective and efficient ways to get employees the training that they need, in a classroom or individually through their desktop or tablet computer.
Hazard Communication in Construction Environments – M221AE (20 mins)
Description
Hazard Communication in Construction Environments both introduces employees to the Hazard Communication regulations and provides training on the various groups of chemicals found in the construction environment. Created specifically to assist construction workers of all types in complying with federal, state and municipal Hazard Communication regulations, the course addresses the major education and training requirements in these chemical hazard laws. Areas covered in the course include background of the regulation, GHS Safety Data Sheets and container labels, toxins, corrosives and irritants; flammables, combustibles and gases; carcinogens and radiation, exposure situations, personal protective equipment and chemical storage, spills and clean-up and more. This VOD program is one of the most effective and efficient ways to get employees the training that they need, in a classroom or individually through their desktop or tablet computer.
Heat Stress Monitoring SS062663
Description
Recently, OSHA has taken a critical step towards establishing a formal heat standard by moving forward with its Notice of Proposed Rulemaking (NPRM) for Heat Injury and Illness Prevention in Outdoor and Indoor Work Settings. This move comes after years of increasing concerns over the impact of rising temperatures on outdoor workers, particularly in industries like agriculture and construction. OSHA’s Rulemaking Process The NPRM initiates the rulemaking process, allowing OSHA to gather information and feedback from stakeholders, including employers, workers, and subject matter experts. This input will inform the development of a comprehensive heat standard that aims to protect workers from heat-related illnesses and injuries. During this phase, OSHA will seek comments on various aspects of the proposed rule, such as: Potential heat stress thresholds and exposure limits Acclimatization protocols for new and returning workers Requirements for providing water, rest breaks, and shade Training and education for employers and employees Monitoring and reporting mechanisms for heat-related incidents
Heat Stress: Facts & Prevention - SSG001E (9 Min.)
Description
Heat Illness...it can happen to just about anybody working in hot or humid conditions. It can be serious. It can be fatal. But, it' doesn't have to be. A few simple, easy to do steps can mean the difference between just another day at work and a serious medical emergency. This video outlines these steps in an easy to understand manner.
Heat Stress: Facts & Prevention - SSG001S (11 min.) SPANISH
Description
More illnesses are surfacing from employees working in abnormally high temperatures, such as in a hot warehouse or warm assembly environment. This video discusses heat stroke, heat stress, fainting, and precautions to take when working in a hot environment.
Hot Work & Fire Prevention SS11082EE (12 Min.)
Description
Welding, grinding, cutting, open flame and other spark-producing tools and operations are all capable of starting dangerous fires in our workplaces. Collectively known as hot work, such processes require specific permits and procedures be followed to prevent the ignition of vapors, liquids and solids that may be in or near the work area. Careless hot work operations can quickly lead to fires, extensive property damage, severe injuries or death. This program discusses the safe work practices that should be taken to prevent such incidents and reviews the responsibilities of those workers involved in hot work tasks.
Hot Work & Fire Prevention SS11082ES (12 Min.) Spanish
Description
Welding, grinding, cutting, open flame and other spark-producing tools and operations are all capable of starting dangerous fires in our workplaces. Collectively known as hot work, such processes require specific permits and procedures be followed to prevent the ignition of vapors, liquids and solids that may be in or near the work area. Careless hot work operations can quickly lead to fires, extensive property damage, severe injuries or death. This program discusses the safe work practices that should be taken to prevent such incidents and reviews the responsibilities of those workers involved in hot work tasks.
Housekeeping: Slips, Trips and Falls Prevention - SSCN001 (6 mins)
Description
Housekeeping/Slips, Trips & Falls A construction site can become a very messy place. But, the longer it stays that way, the more dangerous it becomes. This video outlines the connection between good housekeeping and injury prevention, especially slips, trips & falls. Common trip and fall hazards are shown and the root causes are examined for maximum impact.
Housekeeping: Slips, Trips and Falls Prevention - SSCN001S (6 mins) Spanish
Description
Housekeeping/Slips, Trips & Falls A construction site can become a very messy place. But, the longer it stays that way, the more dangerous it becomes. This video outlines the connection between good housekeeping and injury prevention, especially slips, trips & falls. Common trip and fall hazards are shown and the root causes are examined for maximum impact.
Ladder Safety - SS8019AS (10 mins) Spanish
Description
This video deals with the safe way to use stepladders, straight ladders and platform ladders, as well as common hazards associated with improper ladder use. Explains the 4:1 rule when placing straight ladders, the belt buckle rule, 36″ requirement for straight ladders above landings and more. A great program for new or experienced workers.
Ladder Safety – SS8019AE (10 mins)
Description
This video deals with the safe way to use stepladders, straight ladders and platform ladders, as well as common hazards associated with improper ladder use. Explains the 4:1 rule when placing straight ladders, the belt buckle rule, 36″ requirement for straight ladders above landings and more. A great program for new or experienced workers.
Lead In The Workplace: The Facts - SS1093IE (8 Min.)
Description
Lead…it has a variety of uses. It can be combined with other metals to produce alloys. Lead and lead alloys are often used to make batteries, ammunition, and other metal products. Years ago, lead was also used regularly in paint, ceramics, caulk, and pipe solder among other things. Because of its potential health problems, the amount of lead used in these products today has lessened or has been removed. Though used less often, lead is still common in many industries, including construction, mining, and manufacturing. In each of these industries, workers are at risk of being exposed to lead. This videos outlines the hazards and gives viewers the facts about lead in the workplace.
Lead In The Workplace: The Facts - SS1093IS (8 Min.) Spanish
Description
Lead…it has a variety of uses. It can be combined with other metals to produce alloys. Lead and lead alloys are often used to make batteries, ammunition, and other metal products. Years ago, lead was also used regularly in paint, ceramics, caulk, and pipe solder among other things. Because of its potential health problems, the amount of lead used in these products today has lessened or has been removed. Though used less often, lead is still common in many industries, including construction, mining, and manufacturing. In each of these industries, workers are at risk of being exposed to lead. This videos outlines the hazards and gives viewers the facts about lead in the workplace.
Lockout Tagout Refresher (Employee) - AP4929E
Description
Lockout/tagout is a procedure that isolates a piece of equipment form its energy source. Its purpose is to prevent a piece of equipment from accidentally starting up while a person is performing maintenance or repairs. Before you perform any work that requires lockout/tagout, make sure that you've been properly trained.
Material Handling Safety - M280E (18 Min.)
Description
"Materials handling" is how the things that people need get to where they're needed, on time and intact. And these activities can be dangerous. Every year, thousands of workers are killed or injured while moving, stacking and storing materials. But these accidents don't have to happen. Topics covered include: Preparing yourself to work safely. Understanding "ergonomics". Safe lifting… step-by-step. Hand trucks and dollies. Platform trucks, carts and pallet jacks. Forklift safety. and more,
Material Handling Safety - M280S (18 Min.) Spanish
Description
"Materials handling" is how the things that people need get to where they're needed, on time and intact. And these activities can be dangerous. Every year, thousands of workers are killed or injured while moving, stacking and storing materials. But these accidents don't have to happen. Topics covered include: Preparing yourself to work safely. Understanding "ergonomics". Safe lifting… step-by-step. Hand trucks and dollies. Platform trucks, carts and pallet jacks. Forklift safety. and more,
Nail Gun Safety SSC0024A (11 Min.)
Description
Nail guns are commonly used on jobsites. But, just because they are common, doesn’t mean they don’t pose a potential safety hazard…they do. With that being said, anyone using one should be properly training on its usage and safety concerns. That’s what this video is all about.
Nail Gun Safety SSC0024S (11 Min.) Spanish
Description
Nail guns are commonly used on jobsites. But, just because they are common, doesn’t mean they don’t pose a potential safety hazard…they do. With that being said, anyone using one should be properly training on its usage and safety concerns. That’s what this video is all about.
OSHA's Top Citations - SS1121AE (9 Min.)
Description
Discover the critical safety insights you need to know! Join us as we delve into OSHA's Top 10 Violations, shedding light on the most common workplace hazards and how to prevent them. Whether you're an employer, employee, or just concerned about workplace safety, this video is a must-watch. Stay informed, stay safe!
OSHA's Top Citations - SS1121AS (9 Min.) Spanish
Description
Discover the critical safety insights you need to know! Join us as we delve into OSHA's Top 10 Violations, shedding light on the most common workplace hazards and how to prevent them. Whether you're an employer, employee, or just concerned about workplace safety, this video is a must-watch. Stay informed, stay safe!
Overexertion Prevention – SSC018GE (14 min.)
Description
Engineers and maintenance personnel know from experience that moving parts in equipment and machinery, if not properly used and maintained, are subject to wear and tear. Yet when it comes to our own bodies, we often think of them as indestructible. Overexertion type injuries are the highest percentage of worker compensations costs representing nearly 30 cents of every $1 in claims paid. These types of injuries are often associated with lifting, pushing, pulling, tossing and handling material. In this effective and motivational program, your employees will learn how the body functions, risk factors associated with overexertion type injuries, and preventive measures they can utilize to reduce their exposure and prevent injuries. The program teaches the impact their posture can have on their body and the cumulative affect of improper lifting techniques. The visual graphics and comprehensive information will educate and motivate your employees to make the proper decisions and lifestyle adjustments to ensure their health and safety.
Overexertion Prevention – SSC018GS (14 min.) Spanish
Description
Engineers and maintenance personnel know from experience that moving parts in equipment and machinery, if not properly used and maintained, are subject to wear and tear. Yet when it comes to our own bodies, we often think of them as indestructible. Overexertion type injuries are the highest percentage of worker compensations costs representing nearly 30 cents of every $1 in claims paid. These types of injuries are often associated with lifting, pushing, pulling, tossing and handling material. In this effective and motivational program, your employees will learn how the body functions, risk factors associated with overexertion type injuries, and preventive measures they can utilize to reduce their exposure and prevent injuries. The program teaches the impact their posture can have on their body and the cumulative affect of improper lifting techniques. The visual graphics and comprehensive information will educate and motivate your employees to make the proper decisions and lifestyle adjustments to ensure their health and safety.
Panel Saw Safety SS1117IE (8 Min.)
Description
This video addresses proper workspace setup, the basics of making cuts, general safety procedures, and proper maintenance.
Panel Saw Safety SS1117IS (8 Min.) Spanish
Description
This video addresses proper workspace setup, the basics of making cuts, general safety procedures, and proper maintenance.
Personnel Baskets & Aerial Lifts - SS1039GE (17 Min.)
Description
Falls are one of the leading causes of fatalities of construction workers. Working at height is inherently dangerous. The video provides the safety basics regarding work in aerial lifts and manbaskets. Topics include: Equipment Inspection, Worksite Inspections, Pre-work meetings, Proper equipment setup, Controls, Fall protection and more.
Personnel Baskets & Aerial Lifts - SS1039GS (17 Min.) Spanish
Description
Falls are one of the leading causes of fatalities of construction workers. Working at height is inherently dangerous. The video provides the safety basics regarding work in aerial lifts and manbaskets. Topics include: Equipment Inspection, Worksite Inspections, Pre-work meetings, Proper equipment setup, Controls, Fall protection and more.
Pneumatic Tool Safety - SS1023HE (6 mins.)
Description
Power Saw Safety - SS1021HE (7 Min.)
Description
Power Saw Safety - SS1021HS (7 Min.) Spanish
Description
Pre-Shift Walk Around Inspection: Backhoes SSC017EE
Description
Backhoes must be inspected before they are operated, every time its operated. It’s the law. A proper inspection protects the operator and those working nearby by ensuring that the equipment is mechanically safe. That’s what this video is all about, how to preform a thorough and accurate pre-shift inspection. The equipment is broken down into 4 quadrants to ensure accuracy and consistency for every inspection.
Pre-Shift Walk Around Inspection: Backhoes SSC017ES Spanish
Description
Backhoes must be inspected before they are operated, every time its operated. It’s the law. A proper inspection protects the operator and those working nearby by ensuring that the equipment is mechanically safe. That’s what this video is all about, how to preform a thorough and accurate pre-shift inspection. The equipment is broken down into 4 quadrants to ensure accuracy and consistency for every inspection.
Propane Safety - Fueling your Forklift - SS1032GE (7 Min.)
Description
This program focuses on the key fundamentals to safely handle propane tanks in relation with forklifts. From safe storage to switching out tanks, this program is a great f0r anyone that will be working with propane tanks and forklifts.
Propane Safety - Fueling your Forklift - SS1032GS Spanish (7 Min.)
Description
This program focuses on the key fundamentals to safely handle propane tanks in relation with forklifts. From safe storage to switching out tanks, this program is a great f0r anyone that will be working with propane tanks and forklifts.
Respiratory Protection: The Facts - SS1030BE (17 mins)
Description
Sometimes it is difficult to respect a hazard you can’t see or one that may take years to affect you. Respirators can provide protection, but only if they are worn and used properly. Respiratory Protection creates an awareness and respect for the hazards by demonstrating with highly effective graphics how the respiratory system works and the effects of different airborne hazards. The program covers proper use, care and maintenance of air-purifying respirators and the importance of proper selection and fit. Respiratory Protection will educate and motivate your worker on when and how to properly use their air-purifying respirator.
Respiratory Protection: The Facts - SS1030BS (18 mins) Spanish
Description
Sometimes it is difficult to respect a hazard you can’t see or one that may take years to affect you. Respirators can provide protection, but only if they are worn and used properly. Respiratory Protection creates an awareness and respect for the hazards by demonstrating with highly effective graphics how the respiratory system works and the effects of different airborne hazards. The program covers proper use, care and maintenance of air-purifying respirators and the importance of proper selection and fit. Respiratory Protection will educate and motivate your worker on when and how to properly use their air-purifying respirator.
Rigging Safety - M123AS SPANISH
Description
Rigging Safety is designed to remind employees that over 90% of crane-related accidents are caused by human error… and that they are the key to preventing these incidents. We have all heard the phrase… A chain is only as strong as its weakest link. When it comes to crane operations, rigging can often be that weak link. How a load is attached to a crane can make the difference between a successful lift and an unfortunate accident. And rigging-related accidents can often be deadly, due to the large and heavy loads that are lifted. A small miscalculation, or a brief moment of inattention, and tragedy could strike. Once a load falls not much can be done to stop it, and there is little time for people to move safely out of the way. A coworker can be injured or killed, and expensive equipment and cargo could be damaged or destroyed… even the crane itself. Areas covered in the course include physical and mental preparation, personal protective equipment, equipment inspection, hazard assessment, slings, hitches, hand signals, load angles, and more. This VOD program is one of the most effective and efficient ways to get employees the training that they need, in a classroom or individually through their desktop or tablet computer.
Rigging Safety – M123E
Description
Rigging Safety is designed to remind employees that over 90% of crane-related accidents are caused by human error… and that they are the key to preventing these incidents. We have all heard the phrase… A chain is only as strong as its weakest link. When it comes to crane operations, rigging can often be that weak link. How a load is attached to a crane can make the difference between a successful lift and an unfortunate accident. And rigging-related accidents can often be deadly, due to the large and heavy loads that are lifted. A small miscalculation, or a brief moment of inattention, and tragedy could strike. Once a load falls not much can be done to stop it, and there is little time for people to move safely out of the way. A coworker can be injured or killed, and expensive equipment and cargo could be damaged or destroyed… even the crane itself. Areas covered in the course include physical and mental preparation, personal protective equipment, equipment inspection, hazard assessment, slings, hitches, hand signals, load angles, and more. This VOD program is one of the most effective and efficient ways to get employees the training that they need, in a classroom or individually through their desktop or tablet computer.
Rimmed Wheel Tire Inflation Safety Training Program SS062663
Description
The goals of this safety training program are to provide workers who service rimmed wheels on large trucks, buses, and off-road equipment with the information needed to: Prevent accidents and injuries that can occur during tire inflation. Comply with the Occupational Safety and Health Administration (OSHA) Standard 1910.177, titled “Servicing multi-piece and single-piece rim wheels.” Promote a culture of safety and awareness in the workplace.
Rooftop Loading Safety - SS3025AE
Description
Safety Bob’s Comprehensive Construction Orientation – AP1316E (24 min.)
Description
Construction work is very dangerous, as nearly 1,000 workers are killed and thousands of others are injured on construction jobsites each year. While there have been many safety improvements over the years to control the hazards that contribute to these incidents, new and inexperienced workers still get hurt on the jobsite way too often. This program stresses the point that these workers must be responsible for their own personal safety. Construction Safety Specialist Bob Synnett discusses the hazards of construction work and what actions construction workers can take to avoid mishaps on the job. Topics include PPE, Excavation, Ladder Safety, Scaffolding, Fall Protection and Electrical Safety.
Safety Bob’s Comprehensive Construction Orientation – AP1316S (24 min.) Spanish
Description
Construction work is very dangerous, as nearly 1,000 workers are killed and thousands of others are injured on construction jobsites each year. While there have been many safety improvements over the years to control the hazards that contribute to these incidents, new and inexperienced workers still get hurt on the jobsite way too often. This program stresses the point that these workers must be responsible for their own personal safety. Construction Safety Specialist Bob Synnett discusses the hazards of construction work and what actions construction workers can take to avoid mishaps on the job. Topics include PPE, Excavation, Ladder Safety, Scaffolding, Fall Protection and Electrical Safety.
Scaffold Safety - SSC0015E (12 Min.)
Description
Scaffold Safety - SSC0015S (12 Min.) Spanish
Description
Scissor Lifts in Industrial and Construction Environments – M172AS (13 mins) Spanish
Description
Excellent training program for anyone working on or near scaffolding. Attention given to safety rules, operating procedures, and safe use of scaffolds. Meets scaffold training requirements.
Scissor Lifts Safety - SSC0021E (8 Min.)
Description
Accessing high places can be difficult in many work environments. To reach these areas, many workers use scissor lifts. Nearly everyone has seen a scissor lift. They're common on construction sites, both inside and out, and are often found in warehouses and other large buildings as well. Topics covered in the program include: The types of scissor lifts and the training needed to operate them. The hazards associated with using scissor lifts. "Pre-start" and "worksite" inspections. Setting up, operating and moving a scissor lift. Working on the ground near a scissor lift. and more.
Scissor Lifts Safety - SSC0021S (8 Min.) Spanish
Description
Accessing high places can be difficult in many work environments. To reach these areas, many workers use scissor lifts. Nearly everyone has seen a scissor lift. They're common on construction sites, both inside and out, and are often found in warehouses and other large buildings as well. Topics covered in the program include: The types of scissor lifts and the training needed to operate them. The hazards associated with using scissor lifts. "Pre-start" and "worksite" inspections. Setting up, operating and moving a scissor lift. Working on the ground near a scissor lift. and more.
Shop Safety - SS1083IE (8 mins)
Description
The shop. It’s a busy place with a variety of functions, tools, personnel, and responsibilities. Perhaps the most important responsibility is safety…your safety and the safety of those working around you. This video focuses on some of the common hazards to all shops: Fire Prevention Electrical Safety Compressed Gas Respiratory Hazards. Safe Lifting Chemicals. Slips and Falls and Injury Reporting
Shop Safety - SS1083IS (8 mins) Spanish
Description
Skid Steer Loader Safety Training SSC0025EE (7 Min.)
Description
If your employees use a skid steer loader or Bobcat on the job site, then you need this skid steer safety video. As you know, the skid steer is a very useful machine, but make no mistake, it can be dangerous. This skid steer training video teaches your employees several key concepts to keep them safe on the job.
Skid Steer Loader Safety Training SSC0025ES (7 Min.) Spanish
Description
If your employees use a skid steer loader or Bobcat on the job site, then you need this skid steer safety video. As you know, the skid steer is a very useful machine, but make no mistake, it can be dangerous. This skid steer training video teaches your employees several key concepts to keep them safe on the job.
Stormwater Pollution Prevention Program (SWPP) Spanish SS1124AS (14 Min.)
Description
Cuando el agua pluvial fluye a través de estacionamientos, áreas de almacenamiento de productos químicos, áreas de actividad industrial externa, áreas de manejo de desechos, operaciones de carga/descarga de materiales y áreas similares, puede recoger desechos como: productos químicos, fertilizantes, bacterias fecales, contaminantes y otros materiales peligrosos. . Esta agua pluvial ahora contaminada puede fluir sin tratar directamente a cuerpos de agua cercanos que se utilizan para nadar, beber, recrearse y cultivar. Este programa describe su responsabilidad de prevenir la contaminación y los pasos que puede tomar para ayudar a alcanzar este objetivo.
Stormwater Pollution Prevention Program (SWPP) SS1124AE (11 Min.)
Description
When stormwater flows through parking lots, chemical storage areas, areas of outside industrial activity, waste management areas, material loading / unloading operations and similar areas, it can pick up debris such as: chemicals, fertilizers, fecal bacteria, pollutants and other hazardous materials. This now-contaminated stormwater can then flow untreated directly into nearby bodies of water used for swimming, drinking, recreation and farming. This program outlines your responsibility to prevent pollution and steps you can take to help reach this goal.
Struck By Hazards In Construction - M277E (19 Min.)
Description
Struck-by accidents occur when a person is hit by a moving object. On construction sites this can include being hit on the head by a falling hammer, hit by particles being thrown from a grinder, hit by a truck that's backing up, or hit by a load of wallboard that's being hoisted. Struck-by accidents are one of the four top causes of fatalities in construction work, and can result in serious injuries as well. But they don't have to happen. Topics covered in these products include: What are struck-by hazards? Personal protective equipment. Traffic safety. Heavy equipment. Hand and power tools. Masonry walls, overhead work and building materials. and more.
Supported Scaffold - M074E (23 mins)
Description
Supported Scaffold - M074S (23 mins) Spanish
Description
Surviving The Fall: Proper Use Of Your Personal Fall Arrest System - AP4731E (11 mins)
Description
Falling just a short distance can generate huge forces and cause injury, even if you don’t hit the ground. The proper use of fall protection equipment reduces these forces and prevents injuries. In this program, viewers will see fall protection equipment deployed in actual fall events and learn the proper selection and use of these devices. In addition to safe work practices, such as 100 percent tie-off techniques, emphasis is placed on having a rescue plan in place should a fall occur.
Telehandlers: Safe Operation - SSC018S (12 min.) Spanish
Description
The Telehandler is a versatile piece of equipment found on almost every job site. These unique machines can lift up to 10,000 loads and extend outwards 30 to 40 feet. Because of the size and power of this machine the safety and training of for this equipment is very important.
Telehandlers: Safe Operation – SSC018E (12 min.)
Description
The Telehandler is a versatile piece of equipment found on almost every job site. These unique machines can lift up to 10,000 loads and extend outwards 30 to 40 feet. Because of the size and power of this machine the safety and training of for this equipment is very important.
To the Point About Personal Fall Arrest Systems - ETP14
Description
Work above ground comes with increased risk because of the possibility of a fall. While your organization maintains railing on commonly-used elevated work areas, workers must sometimes venture beyond this protection. When this is the case, a personal fall arrest system is required. This program reviews the proper selection and use of fall arrest equipment. Topics include the three components of a personal fall arrest system, calculating total fall distance, safe use of self-retracting lifelines, using fall arrest equipment 100% of the time, and survival & rescue after a fall event.
To the Point About Personal Fall Arrest Systems - SSETP14 - Spanish
Description
Work above ground comes with increased risk because of the possibility of a fall. While your organization maintains railing on commonly-used elevated work areas, workers must sometimes venture beyond this protection. When this is the case, a personal fall arrest system is required. This program reviews the proper selection and use of fall arrest equipment. Topics include the three components of a personal fall arrest system, calculating total fall distance, safe use of self-retracting lifelines, using fall arrest equipment 100% of the time, and survival & rescue after a fall event.
To The Point About: Confined Space Entry - APTP02
Description
Our workplace is full of hazards, hazards than can hurt us, or kill us. Controlling these hazards and preventing injuries is the point of our safety and health program. One such hazard is the conditions that exist inside confined spaces such as manholes, tanks, vessels, pits and similar areas. Controlling access to confined spaces and the hazards they contain can prevent injuries and safe lives. That is the point of our facility’s Confined Space Entry Program and that is the point of this program. Topics include the confined space entry permit, atmospheric hazards, atmospheric testing and monitoring, other confined space hazards and how they are controlled and the duties of the entry supervisor, the attendant and the entrants.
Traffic Control Work Zone Safety: Flagger Safety SS21003AE
Description
Being the Flagger at a construction or traffic control site is an important and dangerous job. You are responsible for the safe flow of traffic but you are also responsible for your personal safety. This video outlines methods and procedures that will keep the vehicles in your zone safe as well as you and people working in the traffic control zone.
Traffic Control Work Zone Safety: Flagger Safety SS21003AS Spanish
Description
Being the Flagger at a construction or traffic control site is an important and dangerous job. You are responsible for the safe flow of traffic but you are also responsible for your personal safety. This video outlines methods and procedures that will keep the vehicles in your zone safe as well as you and people working in the traffic control zone.
Trenching and Shoring: Excavation Safety SSC003E (13 Min.)
Description
This program covers the hazards of trenching, soil types and protective systems, the competent person, worksite inspection, testing, access, egress, setback and equipment, working defensively and more.
Trenching and Shoring: Excavation Safety SSC003S(13 Min.) Spanish
Description
This program covers the hazards of trenching, soil types and protective systems, the competent person, worksite inspection, testing, access, egress, setback and equipment, working defensively and more.
Walking & Working Surfaces - M242S (18 mins) Spanish
Description
Walking and Working Surfaces training identifies the hazards that are associated with different surfaces, and provides the practical information and specific procedures employees need to help prevent slips, trips and falls on the job.
Walking and Working Surfaces SS1116IE (12 Min.)
Description
Like numerous other workplace safety requirements, OSHA has specific standards for the different types of walking and working surfaces we all encounter on the job, on a daily basis. The ultimate goal of these standards and this training is to prevent as many slips, trips and falls as possible – both in the workplace and at home. Topics include: Slip, trip and fall awareness “Defensive” walking Housekeeping and aisles Stairs, walkways and railings Openings Ladder safety Scaffolds, and more The vast majority of accidents related to walking and work surfaces are preventable and need not happen, so it is imperative your employees or associates receive this 10 minute training.
Walking and Working Surfaces SS1116IS (12 Min.) Spanish
Description
Like numerous other workplace safety requirements, OSHA has specific standards for the different types of walking and working surfaces we all encounter on the job, on a daily basis. The ultimate goal of these standards and this training is to prevent as many slips, trips and falls as possible – both in the workplace and at home. Topics include: Slip, trip and fall awareness “Defensive” walking Housekeeping and aisles Stairs, walkways and railings Openings Ladder safety Scaffolds, and more The vast majority of accidents related to walking and work surfaces are preventable and need not happen, so it is imperative your employees or associates receive this 10 minute training.
Warehouse Safety: The Basics - SS1099AE (11 Min.)
Description
Warehouses play a critical role in our economy. They tend to be fast-paced and busy environments which can give rise to many different types of hazards. As a result, more employee fatalities occur in warehouses than in most other workplaces, and thousands of injuries occur there every year. This training program makes sure employees are informed about warehouse hazards and how to avoid them.
Warehouse Safety: The Basics - SS1099AS (11 Min.) Spanish
Description
Warehouses play a critical role in our economy. They tend to be fast-paced and busy environments which can give rise to many different types of hazards. As a result, more employee fatalities occur in warehouses than in most other workplaces, and thousands of injuries occur there every year. This training program makes sure employees are informed about warehouse hazards and how to avoid them.